AIC ADV80 CAN Gauge

Original price was: $690.00.Current price is: $640.00. Incl. GST (For NZ Customers) $556.52 Excl. GST (For International Customers)

Incl. Tax (NZ Customers)

Excl. Tax (International Customers)

In Stock

Sale!

AIC ADV80 CAN Gauge

SKU 360-0009 Category

Description

Introducing the ADV80 CAN Gauge by AIC

Designed and manufactured in New Zealand, this is more than just a display! It allows users to control, protect and monitor their performance vehicles with a singular device.

Compatible with 10 common aftermarket ECU platforms, including Link, Haltech, Maxx Etc.

Replaces or supplements traditional gauges for a clean and simple digital alternative by reading 46+ live data points directly from the engine control unit (ECU/ECM) via CAN bus and displaying it on a vibrant full colour, sunlight readable 80mm IPS touch screen.

Access data via dedicated, Boost, Lambda and Tachometer screens as well as three user configurable multi gauge displays and two user defined custom gauges on the fly, via the touch screen.

Set warnings such as an engine check light, manifold pressure, lambda, shift light etc.

Allows users to make quick adjustments to parameters such as boost control and traction control eliminating the need for separate switches or keypads in many applications.

Features a unique dual point Oscilloscope display for quick fault finding without needing a laptop!

Set a 4 digit pin code to lock your ecu adding another layer of security, particularly useful in race vehicles with no traditional ignition key.

The housing feature a 52mm diameter rear section allowing easy fitment to common gauge holders, but the screen is much larger than most other options at 80mm.

Key Features:

  • Anodised 6061 Aluminium Housing

  • 46+ Data Points

  • Dim Display Input

  • ECU Security

  • Fault Code Display

  • Dual Point Data Scope

  • Adjustable Units and Scaling

  • Adjustable Warnings

  • Adjust Boost Level

  • Adjust Traction Control

  • Enable/Disable Antilag

  • Enable/Disable Launch Control

User Selectable Screens:

  • Boost Gauge

  • Lambda Gauge (Dynamic)

  • Tachometer Gauge

  • Multi-Gauge A

  • Multi-Gauge B

  • Multi-Gauge C

  • User Defined Gauge 1

  • User Defined Gauge 2

  • Fault Code Monitor

  • Show All Data

  • Oscilloscope

  • Control ECM

  • Security

  • Settings

     

Compatible with: 

  • Link Engine Management

  • Haltech

  • Maxx Ecu

  • Emtron

  • Ford Barra

  • Hondata

  • ECU Masters

  • Motorsport Electronics UK

  • Megasquirt

  • Edelbrock

     

    Available CAN Data:

    Accelerator Pedal Position Exhaust Gas Temperature 3 Gear Position Manifold Pressure
    Barometric Pressure Exhaust Gas Temperature 4 Ignition Angle Manifold Peak Pressure
    Voltage Exhaust Gas Temperature 5 Inlet Cam Position Oil Pressure
    Coolant Pressure Exhaust Gas Temperature 6 Inlet Cam 2 Position Oil Temperature
    Coolant Temperature Exhaust Gas Temperature 7 Injector Pulse Width Throttle Position
    ECU Temperature Exhaust Gas Temperature 8 Injector Duty Cycle Transmission Temperature
    Engine Speed Fuel Pressure Injector Duty Cycle Secondary Vehicle Speed
    Ethanol Content Fuel Temperature Injector Differential Pressure Wheel Speed – Left Front
    Exhaust Cam Position Fuel Trim Long Bank 1 Inlet Air Temperature Wheel Speed – Left Rear
    Exhaust Cam 2 Position Fuel Trim Long Bank 2 Lambda Wheel Speed – Right Front
    Exhaust Gas Temperature 1 Fuel Trim Short Bank 1 Lambda 2 Wheel Speed – Right Rear
    Exhaust Gas Temperature 2 Fuel Trim Short Bank 2 Lambda Overall Fault Codes

    * The gauge can only display data that is available from the engine control unit.

 

Connection

The Gauge comes with a pre terminated 6 pin harness, use the colour code below for connection. The gauge requires a 0.5A fused supply and 12V nominal DC voltage.

01 – Black – Ground

02 – Red – Ignition 12V Supply

03 – Orange – Dim Display

04 – Yellow – CAN High Signal

05 – Green – CAN Low Signal

06 – Brown – No Connection

 

Mounting

2x M3 tapped holes are provided on the housing back for custom bracket adaption if required. The holes are 44mm across centers. The gauge also has a 52mm body for mounting into standard gauge holders.

 

 

 

 

 

 

Further Information

Is available via the Wiki section of the AIC website.

Additional information

Weight 250 g
Brand

Part Type

Uses

Product Enquiry

Your cart is currently empty.

Return to shop

Related Products

Shopping cart0
There are no products in the cart!
Continue shopping