Description
2 pin Nissan (Late – approx 1999-on) Grey Engine Coolant Temperature Sensor & S15 Silvia / R34 Skyline Fuel Pump Connector
This connector is device compatible with the common RB20/25/26 water temp sensor connector found on 1990’s models such as R32 and R33 Skylines, but is the later series of connector introduced to Nissan wiring looms from around 1999-on. These later connectors have different terminals and a white front lock (rather than orange). It is typical to find these later connectors start to appear on models such as S15 Silvia, R34 Skyline and then be used extensively on models from the early 2000’s-on such as 350Z, V35 Skyline, R35 GTR etc.
Suits the following engine coolant temperature sensor as well as the 2-pin connector on the outside of fuel pump assembly lid on S15 and R34 models.
By default, we supply this connector with terminals to suit 0.85-1.25 mm2 (18-16 AWG) wire, which is the ‘medium’ size. However, we can swap out the terminals for either smaller, or larger terminals if required – see below. Please leave a note in the ‘order notes’ section stating which size you need.
Small – Wire size = 0.3-0.5 mm2 (22-20 AWG) – Available on request
Medium – Wire size = 0.85-1.25 mm2 (18-16 AWG) – Supplied with connector as default terminal
Large – Wire size = 2.0 mm2 (14 AWG) – Available on request
Connector comes with connector housing, terminals and seals.
Please check your original connector’s shape and keying before purchasing!




