Description
Genuine Nissan Throttle Position Sensor (TPS)
Suits the follwing Nissan RB26DETT engines:
- Nissan Skyline BNR32 GTR (RB26DETT, 08/1989 – 01/1995)
- Nissan Skyline BNR32 GTR N1 (RB26DETT, 10/1991 – 02/1993)
- Nissan Skyline BNR32 GTR V-Spec (RB26DETT, 02/1993 – 02/1994)
- Nissan Skyline BNR32 GTR V-Spec II (RB26DETT, 02/1994 – 01/1995)
- Nissan Skyline BNR32 GTR V-Spec II N1 (RB26DETT, 02/1994 – 01/1995)
- Nissan Skyline BNR32 GTR V-Spec N1 (RB26DETT, 02/1993 – 02/1994)
- Nissan Skyline BCNR33 GTR (RB26DETT, 01/1995 – 05/1998)
- Nissan Skyline BCNR33 GTR V-Spec (RB26DETT, 01/1995 – 05/1998)
- Nissan Skyline BCNR33 GTR V-Spec N1 (RB26DETT, 01/1995 – 05/1998)
- Nissan Skyline BNR34 GTR (RB26DETT, 01/1999 – 08/2002)
- Nissan Skyline BNR34 GTR V-Spec (RB26DETT, 01/1999 – 08/2000)
- Nissan Skyline BNR34 GTR V-Spec II (RB26DETT, 08/2000 – 08/2002)
- Nissan Skyline BNR34 GTR V-Spec II N1 (RB26DETT, 08/2000 – 08/2002)
- Nissan Skyline BNR34 GTR V-Spec N1 (RB26DETT, 01/1999 – 08/2000)
- Nissan Stagea WGNC34 260RS, Series 1 (RB26DETT, 11/1997 – 08/1998)
- Nissan Stagea WGNC34 260RS, Series 2 (RB26DETT, 08/1998 – 03/2001)
Plugs are available separately. See notes below regarding the two connectors:
These throttle position sensors have two electrical connectors. One of the connectors is the idle/wide open throttle switch and the other is variable range.
When replacing a factory sensor on a GT-R with a factory ECU, both of these plugs need to be connected.
If you are using an aftermarket ECU, only the variable range connector needs to be used.
